Products
Carbon fibre poles and fittings
Every pole is made to diameter. The sizes below are our standard range; custom diameters and lengths are made to suit your project.
Boats & motor yachts · 4–8 m
Slim carbon fibre poles
Made from Tg 120 °C carbon fibre prepreg and supplied ready to fit with an AISI 316 top fitting. Standard rod holders (40–41 mm bore) are typically used as sockets; the socket must be larger than the pole’s outer diameter.
- Low weight, high strength
- Very low thermal expansion
- Corrosion-proof and maintenance-free
| Inner Ø (mm) | Outer Ø (mm) | Length (cm) |
|---|---|---|
| 20 | 25 | 150 · 170 · 200 |
| 25 | 30 | 150 · 170 · 200 |
| 30 | 35 | 150 · 170 · 200 |
| 32 | 38 | 150 · 170 · 200 |
| 32 | 40 | 150 · 170 · 200 |
| 35 | 40 | 150 · 170 · 200 |
| 40 | 45 | 150 · 170 · 200 |

Sailboats & large yachts · KFM 50–100
Heavy carbon fibre poles
Made by prepreg filament winding. Angle-oriented plies reduce bending, torsion and fatigue from wind and vibration. Fitted to the deck with a chrome base socket or to the hull side with a Delrin side mount.
- KFM 50
- KFM 60
- KFM 70
- KFM 80
- KFM 90
- KFM 100
- Material
- Carbon fibre + epoxy
- Length
- 1200–2500 mm
- Density
- 1,55 ± 0,05 g/cm³
- Tensile strength
- 900–1200 MPa
- Elastic modulus
- 70–110 GPa
- Wind resistance*
- ≤ 120 km/h
- Operating temp.
- −40 … +110 °C
- Finish
- Gloss / matt epoxy, UV lacquer
* Depends on system type.
| Inner Ø (mm) | Outer Ø (mm) | Length (cm) |
|---|---|---|
| 45 | 50 | 150–220 |
| 50 | 55 | 150–220 |
| 50 | 60 | 150–220 |
| 60 | 65 | 150–220 |
| 60 | 70 | 150–220 |
| 70 | 80 | 150–220 |
| 80 | 90 | 150–220 |
| 90 | 100 | 150–220 |
| 100 | 110 | 150–220 |
Pole selector
Which diameter do you need?
Poles are selected by horizontal load capacity. Pick the pole length and the load the canopy puts on it; the slimmest suitable diameter is highlighted.
Bowsprit
Carbon fibre bowsprit
The spar that projects forward from the bow to carry gennakers, asymmetric spinnakers and code zeros. Less weight at the bow means less pitching and a steadier ride.
- Light, very stiff construction
- Salt-water and UV resistant
- Diameter and length to suit your boat
| Inner Ø (mm) | Outer Ø (mm) | Length (cm) |
|---|---|---|
| 40 | 50 | 150 · 170 · 200 |
| 50 | 60 | 150 · 170 · 200 |
| 60 | 70 | 150 · 170 · 200 |
| 70 | 80 | 150 · 170 · 200 |
| 80 | 90 | 150 · 170 · 200 |
| 90 | 100 | 150 · 170 · 200 |
| 100 | 110 | 150 · 170 · 200 |

Complete shade solutions
Shade system sets
Poles, top and bottom fittings, snap hooks and cabin-top fittings in one package. Send us your boat’s dimensions and we will specify the number of poles, diameter and mounting type for your set.
- Aft deck, flybridge and foredeck applications
- Option to attach to the T-top or cabin roof
- Canopy corners clip on in seconds

Accessories & fittings
Ready-to-fit AISI 316 fittings
Base fittings slot into the pole and mount to the deck. Delrin side mounts fix to the hull side.
Top fitting
Eye end. The canopy corner clips on with a snap hook.
Base socket (female / male)
Flush deck mount. Standard length 150 mm.
Side mount
Bolts to the hull side.
Cabin-top fitting
Mounts to the corners of the T-top or cabin roof.
Snap hook
Quick attachment for canopy corners.
Tensioning kit
Line clutch, aluminium top cap and Delrin base insert.
| Outer Ø (mm) | Flange Ø (mm) | Length (mm) |
|---|---|---|
| 20 | 25 | 40 |
| 25 | 30 | 40 |
| 30 | 35 | 40 |
| 32 | 40 | 40 |
| 35 | 40 | 40 |
| 40 | 45 | 40 |
| Inner Ø (mm) | Outer Ø (mm) | Length (mm) |
|---|---|---|
| 40 | 45 | 150 |
| 45 | 50 | 150 |
| 50 | 55 | 150 |
| 55 | 60 | 150 |
| 60 | 65 | 150 |
| 65 | 70 | 150 |
| 70 | 75 | 150 |
| 75 | 80 | 150 |
| 80 | 100 | 150 |
| 85 | 100 | 150 |
| 90 | 110 | 150 |
| 95 | 110 | 150 |
| 100 | 120 | 200 |