Mounting options: rod holders, base sockets and side mounts

How to mount a carbon awning pole on your boat: rod holders, chrome base sockets, Delrin side mounts and cabin-top fittings.

Mounting options: rod holders, base sockets and side mounts

Once you have the right pole, the next question is how it attaches to the boat. There are four common options.

1. Existing rod holders

On 4–8 m boats the simplest route is the rod holders you already have. Standard holders have a 40–41 mm bore; our slim poles fit, as long as the pole’s outer diameter is smaller than the bore.

2. Chrome base socket (flush)

An AISI 316 base socket slots into the pole and is fixed to the deck. Female and male types are available, bores 40–100 mm, standard length 150 mm. With the pole out, only a flat flange remains.

3. Delrin side mount

Where there is no deck space, the pole goes into a Delrin mount bolted to the hull side. Delrin is light, corrosion-free and won’t scratch the carbon.

4. Cabin-top fittings and snap hooks

To fix one edge of the canopy to a T-top or cabin roof, use cabin-top fittings. Corners clip on with 8 mm AISI 316 snap hooks in seconds — and you need fewer poles.

Not sure which suits your boat? Send us a photo of the mounting area and we will choose with you.