How to choose an awning pole diameter

Two things decide the right carbon awning pole diameter: pole length and the horizontal load from the canopy. Explained with examples from our load tables.

How to choose an awning pole diameter

What loads an awning pole is not weight but the sideways pull of the canopy. As wind fills the canopy, that load acts at the top of the pole and tries to bend it, so diameter is chosen by horizontal load capacity.

Longer poles carry less

The longer the pole, the longer the lever. Our load tables show it clearly: a Ø40 mm pole carries 45 kg at 100 cm but only 22 kg at 230 cm — roughly double the length, half the capacity.

Diameter adds capacity fast

At 150 cm, a Ø30 mm pole carries 15 kg and a Ø40 mm pole 30 kg. In the heavy range the gap is wider: at 170 cm, Ø50 mm carries 120 kg, Ø70 mm 290 kg and Ø100 mm 520 kg.

A practical order

  1. Measure the length needed from deck to canopy attachment.
  2. Estimate the horizontal load from the canopy size and where you sail. If unsure, send us the canopy dimensions.
  3. In that length’s row, pick the slimmest diameter that meets the load. A heavier pole than needed only adds weight on deck.
  4. Check the base socket bore is larger than the pole’s outer diameter.

The pole selector on the Products page does this for you. For anything outside the table, we make poles to the diameter you need.